China Manufactural Water Filtration Double Layer PP Pleated Filter Cartridge for Impurities Intercept
We insist about the theory of growth of ‘High excellent, Performance, Sincerity and Down-to-earth working approach’ to offer you with great company of processing for China Manufactural Water Filtration Double Layer PP Pleated Filter Cartridge for Impurities Intercept, We, with open arms, invite all interested potential buyers to visit our web-site or get in touch with us immediately for further information and facts.
We insist about the theory of growth of ‘High excellent, Performance, Sincerity and Down-to-earth working approach’ to offer you with great company of processing for TS Made Double Layer PP Pleated Filter, Welcome to visit our company and factory, there are various solutions displayed in our showroom that will meet your expectation, meanwhile, if you are convenient to visit our website, our sales staff will try their efforts to supply you the best service
◆ Multi layers fine polypropylene membrane offer superior dirt holding capacity
◆ High flow rate and excellent filtration efficiency
◆ Complete Polypropylene structure, wide chemical compatibility
◆ Suitable for the fluids which is high viscosity or contain high bio-burdens
◆ Replace Sartorius ,Pall or Millipore Filter is available
•High viscosity fluids, such as syrups;
•Wine, Beer, Juice and mineral water in beverge industry;
•Ink, Solvents, plating solutions;
•Prefiltration of R.O. system in electronics industy;
•Oral Liquids, Parenterals, Ophthalmics, Vaccines and other pharmaceuticals.
Table : Typical water flow rate (10″)
| Materials Of Construction | Filter Media: | Multiple layers Polypropylene | |
| Support Layers: | Polypropylene | ||
| Micron Rating: | 0.2, 0.45, 1.0, 3.0, 5.0, 10, 20 um…… | ||
| Inner core: | Polypropylene | ||
| Outer Cage, End caps: | Polypropylene | ||
| Seal Method: | Thermal Bonded, No Adhesives | ||
| O-rings/gaskets: | Silicone, Nitrile, EPDM, Viton, Teflon, etc | ||
| Cartridge Dimensions | Outer Diameter | 69mm(2.75”) | |
| Inner Diameter | 33mm(1.30”) | ||
| Length(based on DOE end caps) | 10″- 254mm, 20″- 508mm, 30″-762 mm, 40″- 1016mm | ||
| Filtration Area(m2) | 0.60 m2 per 10” | ||
| Operating conditions | Normal Operating Temperature: | Up to 55℃ (131℉) | |
| Max.Operating Temperature.: | 80℃ (172℉) at △P≤1.0 bar (14psi) | ||
| Max. Differential Pressure | |||
| Normal Flow direction: | 4.2 bar (60 psi) at 25℃ (77℉) | ||
| Reverse flow direction: | 2.1 bar (30psi) at 25℃ (77℉). | ||
| PH Value compatibility: | 1-13 | ||
| Sterilization: | Flush with hot water at 82℃(180℉) for 30 minutes, at △P≤1.0 bar (14psi) |
||
| Cartridge Safety | Endotoxin: | ＜0.25 EU/ml | |
| Extractables: | 0.03 g / 10″ | ||
| GRADE | PRODUCT | MICRON | ADAPTER | LENGTH | O-RING / GASKET | |
| P- PHARMACEUTICAL | RPP | 045-0.45um | AA- DOE | 10-10″ | S-silicone; N-nitrile | |
| F- FOOD & BEVERAGE | 100-1um | CN-226/FIN | 20-20″ | E-epdm; T-teflon (encaptulated) | ||
| E- ELECTRICAL | 500-5um | BN-222/FIN | 30-30″ | V-viton | ||
| G- General | 1000-10um | BF-222/ FLAT SEAL | 40-40″ | How to Order?- Example | ||
| CF-226/FLAT SEAL | 05-5″ | Pharmaceutical grade; Micron:0.45um; Length:10″ ADAPTER: DOE; Gakset: Silicone. Selection Code is: PRPP045AA10S | ||||
| EN-222 three locking ears /Fin | Other-XX | |||||
We insist about the theory of growth of ‘High excellent, Performance, Sincerity and Down-to-earth working approach’ to offer you with great company of processing for China Manufactural Water Filtration Double Layer PP Pleated Filter Cartridge for Impurities Intercept, We, with open arms, invite all interested potential buyers to visit our web-site or get in touch with us immediately for further information and facts.
TS Made Double Layer PP Pleated Filter, Welcome to visit our company and factory, there are various solutions displayed in our showroom that will meet your expectation, meanwhile, if you are convenient to visit our website, our sales staff will try their efforts to supply you the best service
